Siemens TC35i - AT+FOPT Set Bit Order Independently

TC35i AT Command Set
10.19 AT+FOPT
s
m obil e
TC35i_ATC_V02.07 Page 264 of 439 1/30/04
Confidential / Released
10.19 AT+FOPT Set bit order independently
Syntax
Command Description
Model specific command to set bit order independently of the understanding which is "mirrored" and which is
direct.
Parameter Description
0 non-standard
1 standard
Note
• Used for Fax Class 2 only
Write Command
AT+FOPT=<opt>
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3
! % % ! !
Reference(s)
SIEMENS
<opt>
(num)