Siemens TC35i - ATL Set Monitor Speaker Loudness

TC35i AT Command Set
15.2 ATL
s
m obil e
TC35i_ATC_V02.07 Page 365 of 439 1/30/04
Confidential / Released
15.2 ATL Set monitor speaker loudness
Syntax
Parameter Description
Notes
•Commands ATL and ATM are implemented only for V.25ter compatibility reasons and have no effect.
• In multiplex mode the command is supported on logical channel 1 only.
Exec Command
ATL[<val>]
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3
! % % ! !
Reference(s)
V.25ter
<val>
(num)