Siemens TC35i - ATM Set Monitor Speaker Mode

TC35i AT Command Set
15.3 ATM
s
m obil e
TC35i_ATC_V02.07 Page 366 of 439 1/30/04
Confidential / Released
15.3 ATM Set monitor speaker mode
Syntax
Parameter Description
Notes
•Commands ATL and ATM are implemented only for V.25ter compatibility reasons and have no effect.
• In multiplex mode the command is supported on logical channel 1 only.
Exec Command
ATM[<val>]
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3
! % % ! !
Reference(s)
V.25ter
<val>
(num)