Siemens TE 803 - Customising; Storing or changing the user

11
en
Settings – Per-cup quantity
Î
small
Ð
medium
Ò
large
Settings – Personal per-cup quantity
The preset per-cup quantity
Î
,
Ð
or
Ò
can
be individually adjusted to the size of the
cup in use by turning the rotary knob 6. The
per-cup quantity can be adjusted accord-
ing to the drink selected. An arrow in the
Ò
symbol in the top right-hand corner of the
display indicates whether the per-cup quan-
tity was increased or decreased. If you set
for example Coffee Á, the adjustment of
the per-cup quantity in ml, and in the case
of a milk-based coffee drink, for example
Cappuccino
Æ
, the adjustment of the per-
cup quantity including the volume of milk
(froth) in ml, is indicated.
Important: The selected amount in ml is
an approximate value and can vary sig-
nicantly as a result of crema forming, the
grind setting or the type of milk used, etc.
Customising
You can store up to 6 user proles in the
User settings menu. The required coffee
and hot water temperatures are saved in
the user proles.
Important: The “Customising” settings
(á button 2) are not identical to those
under “Menu settings” (
j button 7) and vice
versa.
Storing or changing the user
● Hold down the
á button 2 for at least
3 seconds.
The menu appears:
User settings
User 1
 start
User 2
User 3
● Select the required user using the selec-
tion button and press the start button 8.
The following selection appears in the dis-
play:
User settings: User 1
Edit name
 start
Delete name
Coffee temp.
● To change the user name, use the selec-
tion button to go to
Edit name  start
and press the start button 8.
The input eld appears in the display:
â ABCDEFGHIJKLMNOPQ
_ _____
Abort Store
● Turn the rotary knob 6 to select a letter or
number.
● Conrm by pressing the start button 8.