To Next PageTo Next Page
Need help?Do you have a question about the Siemens TI35A209RW and is the answer not in the manual?
General| Type | Fully Automatic Coffee Machine |
|---|---|
| Pump Pressure | 15 bar |
| Milk Frother | Yes |
| Weight | 7.2 kg |
| Model | TI35A209RW |
| Brand | Siemens |
| Color | Black |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Water Tank Capacity | 1.4 L |
| Coffee Bean Container Capacity | 250 grams |
| Power | 1300 W |
| Material | Plastic |
| Features | AromaDouble Shot |
Connect to a grounded power supply only. Do not immerse appliance or cord in water.
Maintain 10cm distance if you have electronic implants due to permanent magnets.
Keep small parts away from children. Milk system and surfaces get very hot.
Switch off when not in use, set auto-off, and descale regularly for efficiency.
Dispose of packaging responsibly and follow WEEE directive for the appliance.
Illustrations identify appliance parts by number for reference in operating instructions.
Lists the items provided in the package: coffee machine, testing strip, milk frother, manual.
Procedure for unpacking, placing, and connecting the appliance to a power source.
Instructions for attaching the milk frother and filling the bean container.
Steps to make Espresso and Caffe Crema using freshly ground coffee beans.
Instructions for frothing milk and making drinks like Cappuccino and Latte Macchiato.
Set the idle time before the appliance automatically powers down.
Enable or disable sound notifications for button presses.
Determine water hardness for accurate descaling reminders.
Guide to selecting safe cleaning products and avoiding damaging agents.
Identifies which appliance parts are safe for dishwasher cleaning.
Steps for cleaning the exterior, control panel, and coffee dispenser.
Important safety information and recommendations for using calc'nClean agents.
Steps for performing the initial rinse cycle of the calc'nClean programme.
A comprehensive table listing problems, causes, and solutions for quick troubleshooting.
Electrical, performance, and physical data of the espresso machine.
Locating and using E and FD numbers for service and support.
Details on warranty terms, conditions, and claims procedures.
