What to do if Siemens Coffee Maker LEDs flash?
If the LEDs on your Siemens Coffee Maker are flashing, this indicates the appliance has a fault, is running on incorrect voltage, or the ambient temperature is too cold. Contact the hotline, operate the appliance at 220 V-240 V only, and ensure the appliance is operated at temperatures > 5° C.
Why is my Siemens Coffee Maker grinding unit not grinding?
If the grinding unit isn't grinding, it might be because the beans aren't falling into the grinding unit, possibly because they're too oily. Try gently tapping the bean container (1) or changing the type of coffee you're using.
Why Siemens TE501 Coffee Maker coffee grounds are too wet?
If the coffee grounds are not compact and are too wet, this may be because the grind setting is either too fine or too coarse, or not enough ground coffee has been used. Try adjusting the grinding unit to a coarser or finer setting, or use 2 level measuring spoons of ground coffee.
What to do if LED I flashes on Siemens Coffee Maker?
If LED I is flashing, it could be due to several reasons: * The brewing unit (5) is soiled. * There is too much pre-ground coffee in the brewing unit (5). * The brewing unit mechanism is stiff. To solve this, clean the brewing unit (5), ensure you are putting in no more than 2 level measuring spoons of ground coffee, or remove and clean the brewing unit.
Why Siemens Coffee Maker coffee has no crema?
The lack of crema in your coffee may be due to an unsuitable type of coffee, beans that are no longer fresh, or a grind setting that isn't right for the beans. To fix this, use a type of coffee with a higher proportion of robusta beans, use fresh beans, or adjust the grind setting to fine.
What to do if Siemens TE501 coffee is too acidic?
If your coffee tastes too acidic, it could be because the grind setting is too coarse, the pre-ground coffee is too coarse or you are using an unsuitable type of coffee. Try adjusting the grinding unit to a finer setting, use finer pre-ground coffee, or switch to a darker roast.
What to do if Siemens Coffee Maker coffee is too bitter?
If your coffee is too bitter, it could be due to a grind setting that is too fine, pre-ground coffee that is too fine, or an unsuitable type of coffee. Adjust the grinding unit to a coarser setting, use coarser pre-ground coffee, or change the type of coffee you are using.
General| Milk Frother | Yes |
|---|---|
| Dimensions | 59.4 x 38 x 51.8 cm |
| Weight | 10 kg |
| Pump Pressure | 15 bar |
| Coffee Strength Settings | Yes |
| Bean Container Capacity | 300 grams |
| Display | LCD |
| Color | Black |
Details hazards related to electrical safety and precautions.
Warns about suffocation hazards, especially regarding packaging.
Describes how to switch the appliance on and off.
How to set and adjust the water hardness level for proper operation.
Detailed steps for cleaning the milk frother after each use.
To Next Page