en Operating the appliance
58
Adjusting beverage settings
Once you have selected a drink, you
can adjust certain values depending on
the drink. To do so, please use the
following buttons and the rotary
selector:
The appliance is set to "barista mode"
by default. Additional values can
therefore be set using the two
navigation buttons. "Barista mode" can
also be switched off. ~ "Menu
settings" on page 63
The factory settings are shown in
orange on the display. The currently
selected settings are backlit.
Adjusting the coffee strength or
selecting ground coffee
A coffee drink is selected.
1. Press the " button.
2. Use the rotary selector to set the
coffee strength or select ground
coffee.
3. Press the " button or the rotary
selector to confirm.
Button Function Selection
" Selecting coffee strength,
ground coffee
■ very mild *
■ mild
■ mild +*
■ normal
■ normal +*
■ strong
■ strong +*
■ very strong
■ very strong +*
■ extra strong
■ doubleShot strong
■ doubleShot strong +
■ doubleShot strong ++*
■ TripleShot strong *
■ TripleShot strong +*
■ Ground coffee
milk Milk/coffee mixing ratio Setting share of milk in %
(only for coffee drinks with milk)
ml Cup size Adjustment of volume in ml increments.
Not available for Ristretto.
# Two cups at once Place two cups under the outlet.
Navigation
button, left
Water Temperature* e.g. for tea drinks:
■ > 60°C (special tea prepa-
ration)
■ > 70°C (white tea)
■ > 80°C (green tea)
■ > 85°C (rooibos tea)
■ > 90°C (black tea)
■ > 97°C (fruit tea)
Navigation
button, right
aromaIntense* ■ normal
■ intense
■ intense +
Selection marked with * is only available for certain drinks or when in "barista mode".
To Next Page
Loading...
