Siemens TQ505DF Series - Changing the Basic Set- Tings; 11 Cleaning and Servicing; Dishwasher-Safe Compon- Ents

en Cleaning and servicing
60
Setting Selection Description
Water hardness 1 (soft)
2 (medium)
3 (hard)
4 (very hard)
1
Water-softening system
Set the appliance to the
local water hardness.
→"Setting the water
hardness", Page52
Key tones Key tones on
1
Key tones off
Switch the button tones
on or off.
Factory settings Full reset?
Continue: OK
Cancel: ←
Restore settings to the
factory settings.
Note:All individual set-
tings will be deleted and
reset to the factory set-
tings.
1
Factory setting (may vary according to model)
10.2 Changing the basic set-
tings
1. Press ⁠.
2. Use or to select the de-
sired basic setting and press ⁠.
a The display will show the setting
options and the navigation sym-
bols will light up. The display indic-
ates the current setting.
3. Use or to make the de-
sired selection and press ⁠.
a The setting is now saved.
4. Use to go back.
5. Press to exit the menu.
Cleaning and servicing
11 Cleaning and servi-
cing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
11.1 Dishwasher-safe com-
ponents
Find out here which components can
be put in the dishwasher.
ATTENTION!
Some components are sensitive to
heat and may be damaged if they are
cleaned in a dishwasher.
▶
Follow the operating instructions of
the dishwasher.
▶
Only put dishwasher-safe compon-
ents in the dishwasher.
▶
Only use programmes that do not
heat the water above 60°C.
Dishwasher-safe
¡ Drip plate
¡ Drip grate
¡ Coffee dregs container
¡ Mechanical fill level indic-
ator
¡ Milk system with adapter
¡ Ground coffee compart-
ment with hinged lid
¡ Milk container with lid
Not dishwasher-safe
¡ Drip tray
¡ Water tank
¡ Water tank lid
¡ Aroma lid
¡ Brewing unit
¡ Beverage dispenser cover