21
Changing the dust bag and filters
Replacing the dust bag
Fig.
20
If the dust bag change indicator in the lid
is filled completely when the floor tool is
lifted from the floor with the highest suc-
tion level selected, the dust bag must be
changed, even though it may not yet be
full. Even if the dust bag is not full, it may
still need changing, due to the type of
dust which has been vacuumed.
First check that the nozzle, suction pipe
and flexible hose are not blocked, as this
would also lead to the dust bag change
indicator being triggered.
Fig.
21
Open the lid by moving the locking lever
in the direction of the arrow.
20
21
To Next Page
Loading...
