Siemens WG44G201IL - Changing the Basic Set- Tings; Cleaning and Servicing; Cleaning the Drum; Cleaning the Detergent Drawer

Cleaning and servicing en
33
15.2 Changing the basic set-
tings
1. Set the programme selector to po-
sition 1.
2. Press ⁠Spin Speedand, at the
same time, turn the programme
selector to position2.
a The display shows the current
value.
3. Set the programme selector to the
required position.
→"Overview of the basic settings",
Page32
4. To change the value, press ⁠Fin-
ish in.
5. To save the changes, switch off
the appliance.
16 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
16.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
▶ Regularly run a programme for
cleaning the drum or wash at tem-
peratures of at least 60°C.
▶ Leave the appliance to dry after
every operation with the door
open, and leave the detergent
drawer to dry.
▶ Run the programme without laun-
dry and using washing powder.
16.2 Cleaning the detergent
drawer
1. Pull out the detergent drawer.
2. Press down on the insert and re-
move the detergent drawer.