Siemens WG44G2MG0 - Buttons

en Buttons
22
Buttons
8 Buttons
Buttons
The selection of programme settings depends on the programme that is set.
You can see the selection options for each programme in the overview for .
Button Selection More information
Start/Nachlegen
(Start/Reload)
¡ Start
¡ Cancel
¡ Pause
Start, cancel or pause the pro-
gramme.
vario Speed ¡ Activate
¡ Deactivate
Activate or deactivate a short washing
programme.
Note:Energy consumption increases.
The washing result is not affected by
this.
⁠Flecken
(Stains)
Multiple selection Select the type of stain.
The temperature, drum movement and
soaking time are all adjusted to suit
the type of stain.
Fertig in (Finish in) Up to 24 hours Set the programme end.
The programme duration is already in-
cluded in the set number of hours.
Once the programme has started, the
programme duration is displayed.
Temp. °C (Tem-
perature)
– 90 °C Adjust the temperature in °C.
Schleudern
(Spin Speed)
- 1400 Adjust the spin speed or activate
(Rinse Hold).
If is selected, the water is not
drained at the end of the washing
cycle and the spin cycle is deactiv-
ated. The laundry remains in the rins-
ing water.
3s (Child Lock
3 sec.)
¡ Activate
¡ Deactivate
→"Childproof lock", Page32
Schleudern (Spin
Speed)
Multiple selection Basic settings
Vorwäsche (Pre-
wash)
¡ Activate
¡ Deactivate
Activate or deactivate prewash, e.g.
for washing heavily soiled laundry.
Extra Spülen
(Rinse Plus)
¡ Activate
¡ Deactivate
Activate or deactivate a washing pro-
gramme with more water and an addi-
tional rinse cycle.
Recommended for particularly sensit-
ive skin or in regions with very soft
water.