Siemens WG54G20XEP - Connecting the Appliance

en Installation and connection
14
2. Unscrew and remove all 4
screws for the transit bolts with a
WAF 13 wrench.
3. Pull the power cable out of the
holder.
4. Remove the 4 sleeves.
5. Put on the 4 cover caps.
6. Press down on the 4 cover caps.
4.5 Connecting the appliance
Connecting the water inlet hose
Note
¡ Observe the information on safety
→Page4 and preventing material
damage →Page10.
1. Connect the water inlet hose.