Technical data en
31
Spin efficiency class
The spin efficiency class of your
appliance can be seen on the energy
label. ~ Page 29
The percentage of residual moisture for
the spin efficiency class in question can
be seen in the following table.
J Technical data
Technical data
Dimensions:
850 x 600 x 590 mm
(Height x width x depth)
Weight
63-83 kg (depending on model)
Mains connection:
Mains voltage 220-240 V, 50 Hz
Nominal current 10 A
Nominal output 2300 W
Water pressure:
100-1000 kPa (1-10 bar)
Power consumption when switched off:
0.14 W
Power consumption when ready for use
(left-on mode):
1.38 W
Î Cottons 60 °C + eco 4 kg 0,94 kWh 48 l 3 ^ h
Î Cottons 40 °C + eco 4 kg 0,63 kWh 48 l 3 ] h
Programme + button Load Approximate consumption values
Energy consumption Water Programme dura-
tion
Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU with cold wa-
ter (15 °C).
The programme temperature information is based on the temperature stated on the care label for the fab-
rics. The actual washing temperature may deviate from the stated programme temperature for energy-
saving reasons.
Spin efficiency class Residual moisture D
in %
A (highest efficiency) D < 45
B 45 <= D < 54
C 54 <= D < 63
D 63 <= D < 72
E 72 <= D < 81
To Next Page
Loading...
