Siemens WM14UQ92GB User Manual

Basic operation en
39
Basic operation
13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
▶
Press
.
It may take a few seconds for the
appliance to switch on.
13.2 Setting a programme
1. Set the programme selector to the
required programme.
→"Programmes", Page26
2. If necessary, adjust the pro-
gramme settings →Page39.
13.3 Adjusting the pro-
gramme settings
Requirement:A programme has
been set.
→"Setting a programme", Page39
▶
Adjust the programme settings.
→"Programmes", Page26
Please follow the information about
operating logic.
Note:The programme settings are
not saved permanently for the pro-
gramme.
13.4 Saving the programme
settings
You can save your individual pro-
gramme settings as favourites.
Requirements
¡ A programme has been set.
¡ The programme settings have
been adjusted.
▶
Press and hold
for approx. 3
seconds.
Press
to call up the saved pro-
gramme.
Note:To overwrite the saved pro-
gramme, repeat the steps above.
13.5 Loading laundry
Notes
¡ Please read the information in the
Safety →Page4 and Preventing
material damage →Page11 sec-
tions to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of
the maximum load for the
→"Programmes", Page26.
Requirement:The laundry is pre-
pared and sorted.
→"Laundry", Page35

Siemens WM14UQ92GB Specifications

General

Load Capacity	9 kg
Energy Efficiency Class	A+++
Spin Speed	1400 rpm
Dimensions (H x W x D)	848 x 598 x 590 mm
Display Type	LED
Appliance placement	Freestanding
Loading type	Front load
Product colour	White
Built-in display	Yes
Control type	Electronic
Door colour	White
Drum material	Stainless steel
Spin-drying class	B
Washing class	A
Delay start	Yes
Delayed start (max)	24 h
Remaining time indication	Yes
AquaStop function	Yes
Child lock	Yes
Width	598 mm
Depth	590 mm
Height	848 mm
Water consumption washing per cycle	44 L