16
– The respective programme duration is displayed by selecting
the programme. The programme duration is adjusted while
the programme is running if the programme duration requires
changing, e.g. due to changes in the programme settings,
foam detection, unbalanced load detection, the load
or soiling.
Ø Select addition programme settings: ~ Page 22,
~ Page 26
– ecoPerfect ¦
Energy-optimised washing by reducing the temperature
while achieving a consistent washing result. When
selected, the display lamp is lit.
– speedPerfect G
For a shorter wash time with a comparable washing effect
to the standard programme. Observe maximum load.
~ Page 22 When selected, the display lamp is lit.
²
The washing temperature is lower than the selected
temperature. For special hygiene requirements, it is
recommended that a higher temperature be selected or
the speedPerfect ( option.
Other settings can be selected depending on the model,
e.g. flot $ (Rinse Hold) button:
When selected, the button indicator lamp is lit and
a corresponding symbol is indicated on the display panel:
Button menos (Less Ironing) – Ø
Button prelav. (Pre-wash) – !
Button extra (Extra rinse) – l + Ë, Ì, Í (Rinse cycles)
Button flot (Rinse Hold) – $
To Next Page
Loading...
