26
Programme settings
Depending on the programme, you can use the programme
settings to adjust the washing process even more efficiently
to your items of washing.
Programme settings:
²
– are active without acknowledgement.
– not retained after appliance is switched off.
– can be selected or deselected or changed depending
on the programme progress.
Buttons Notes
Temperature Before and during the programme the presettings
can be changed depending on the programme
progress. ~ Page 15
Maximum spin speed depends on the programme
and model.
Spin
terminado en/em
(Finished in)
Delays the Finished in time (end of programme).
Before the programme starts, the end of the
programme can be preselected in h steps
up to maximum 24h.
When the programme has started, the preselected
time is displayed e.g. for 8h and counts down until
the wash programme starts. Then the programme
duration is displayed, e.g. 2:30h.
When the programme has started, the preselected
time can be changed as follows:
1. Select inicio/pausa+carga (Start/Pause)
Ü.
2. Select – terminado en/em + (Finished in) button
and change Finish in time.
3. Select inicio/pausa+carga (Start/Pause)
Ü.
terminado en/em +
(Finished in +)
To activate/deactivate the childlock ~ Page 18
ecoPerfect
¦
For saving energy. ~ Page 16
speedPerfect
G
For a shorter wash time. ~ Page 16
menos
Ø
(Less Ironing)
Reduces creasing by special spin sequence followed
by fluffing and reduced spin speed.
². Residual moisture of the washing is slightly
increased.
To Next Page
Loading...
