20
Ø End of programme by flot $ (Rinse Hold). Programme
stops in the last rinse cycle.
– Select inicio/pausa+carga (Start/Pause) Ü.
The programme continues with the drain and spin cycles
(if required change spin speed).
– If only the drain cycle, but not the spin cycle, is required,
select and start the p (Drain) programme.
End of the programme
FINISHED is indicated on the display panel.
If the symbol Å is also indicated on the display panel,
the washing machine has detected too much foam during the
wash programme and therefore automatically activates additional
rinse cycles to eliminate the foam.
²
Dose less detergent in the next wash cycle with the same load.
To Next Page
Loading...
