EasyManua.ls Logo

Siemens WM14Y591GB - After Washing

Siemens WM14Y591GB
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
After washing
1.
Open washing machine door and remove washing.
²
Do not leave any items of washing in the drum. In the next
wash they may shrink or discolour something else.
Remove any foreign objects from the drum and the rubber
seal – risk of rust.
Leave detergent drawer and door open so that residual water
can evaporate.
Before switching the machine off:
²
Always remove the washing. Otherwise, the load display may
malfunction.
Always wait until the programme ends, as the appliance
could still be locked. Then switch the appliance on and wait
for the unlocking device.
2.
Press the # button. Appliance is switched off.
3.
Turn off the tap.
Not required for Aqua-Stop models. ~ Page 56
www.devicemanuals.eu/
Remove any foreign objects from the drum and the rubber
www.devicemanuals.eu/
Remove any foreign objects from the drum and the rubber
Before switching the machine off:
www.devicemanuals.eu/
Before switching the machine off:
Always remove the washing. Otherwise, the load display may
www.devicemanuals.eu/
Always remove the washing. Otherwise, the load display may
could still be locked. Then switch the appliance on and wait
www.devicemanuals.eu/
could still be locked. Then switch the appliance on and wait
for the unlocking device.
www.devicemanuals.eu/
for the unlocking device.
Press the
www.devicemanuals.eu/
Press the
#
www.devicemanuals.eu/
#
button. Appliance is switched off.
www.devicemanuals.eu/
button. Appliance is switched off.

Related product manuals