Siemens WM16W790ES - Additional Programme; Settings; Speedperfect G; Ecoperfect

en Additional programme settings
36
\ Additional programme
settings
Additional programme settings An overview of all additional settings,
which can be selected depending on
the programme, can be found from
~ Page 29.
speedPerfect G
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more energy
than, the selected programme, without
the speedPerfect G setting.
Note: Do not exceed the maximum
load.
Overview of programmes ~ Page 29
ecoPerfect ¦
Energy-optimised washing by reducing
the temperature while achieving a
washing result that is consistent with the
selected programme, without the
ecoPerfect ¦ setting.
Prewash
(prelav. !)
For heavily soiled laundry.
Note: Pour detergent into
compartments I and II.
Water Plus
(extra Ô)
Higher water level and additional rinse
cycle for particularly sensitive skin and/
or for areas with very soft water.
Easy-Iron
(menos Ø)
Reduces creasing thanks to a special
spin sequence followed by fluffing and
reduced spin speed.
Note: The washing's residual moisture
is increased.
sensoFresh î
The intensity of the active oxygen
treatment can be set at 2 levels:
1 Operating the
appliance
Operating the appliance Preparing the washing
machine
Note: The washing machine must be
correctly installed and connected.
From ~ Page 14.
1. Connect the mains plug.
2. Turn on the tap.
3. Open the door.
4. Check that the drum is completely
drained. Drain if necessary.
Ù normal; for light odours
Ú intensive; for strong odours
(cigarettes, kitchen odours)