en Faults and what to do about them.
50
- P - appears on the
display panel when the
cycle is paused.
■ The water level is too high. It is not possible to add laundry. Close the door
immediately, if necessary.
■ Press the Ü button to resume the programme.
- P - and Ï appear on
the display panel when
the cycle is paused.
The door is unlocked. It is possible to add laundry.
If you cannot rectify a fault yourself (after switching the machine off and then on again) or a repair is required:
■ Switch off the appliance and pull the mains plug out of the socket.
■ Turn off the tap and call the after-sales service.
Faults Cause/remedy
To Next Page
Loading...
