Siemens WM16XM92 - Buttons

Buttons en
23
8 Buttons
The selection of programme settings depends on the programme that is set.
You can see the selection options for each programme in the overview for
→"Programmes", Page25.
Button Selection More information
Start/Nachlegen
(Start/Reload)
¡ Start
¡ Cancel
¡ Pause
Start, cancel or pause the pro-
gramme.
varioSpeed ¡ Activate
¡ Deactivate
Activate or deactivate a shorter pro-
gramme duration.
Note:Energy consumption increases.
The washing result is not affected by
this.
Wählen (Select) Multiple selection Select the type of stain.
The temperature, drum movement and
soaking time are all adjusted to suit
the type of stain.
-Fertig in+ (-
Ready In+)
Up to 24 hours Set the programme end.
The programme duration is already in-
cluded in the set number of hours.
Once the programme has started, the
programme duration is displayed.
Temperatur (Tem-
perature)
– 90 °C Adjust the temperature in °C.
Schleudern
(Spin Speed)
- 1600 Adjust the spin speed or activate
(Rinse Hold).
If is selected, the water is not
drained at the end of the washing
cycle and the spin cycle is deactiv-
ated. The laundry remains in the rins-
ing water.
(mains switch) ¡ Switch on
¡ Switch off
Switch the appliance on or off.
Fernstart (Re-
mote Start)
¡ Activate
¡ Deactivate
¡ Open the
HomeConnect
menu
→"Remote start", Page36
⁠ 3Sek. (Child
Lock 3 sec.)
¡ Activate
¡ Deactivate
→"Childproof lock", Page33
Schleudern (Spin
Speed)
Multiple selection Basic settings