Siemens WM16XM92 - Connecting the Appliance to a WLAN Home Network (Wi-Fi) Without WPS Func- Tion; Connecting the Appliance to the Home Connect App

HomeConnect en
35
15.2 Connecting the appli-
ance to a WLAN home
network (Wi-Fi) without
WPS function
If your router does not have a WPS
function, you can connect the appli-
ance to your WLAN home network
(Wi-Fi) manually.
Requirements
¡ Wi-Fi is activated on the router.
¡ The Wi-Fi basic setting is activated
on the appliance.
→"Activating Wi-Fi on the appli-
ance", Page36
¡ The appliance receives signals
from the WLAN home network (Wi-
Fi) at its installation location.
¡ The HomeConnect app is installed
on your mobile device.
1. Press and hold Fernstart for at
least 3seconds.
a The display shows Aut.
2. Set the programme to position2.
a The display shows SAP.
3. Press Start/Nachlegen.
a flashes on the display.
a The appliance now sets up its own
Wi-Fi home network with the name
(SSID) HomeConnect.
4. Call up the Wi-Fi settings on the
mobile device.
Connect the mobile device to the
HomeConnect Wi-Fi network and
enter the Wi-Fi password (key)
HomeConnect.
a Your mobile device connects to
the appliance. The connection pro-
cess may take up to 60seconds.
5. Open the HomeConnect app on
your mobile device and carry out
the steps in the app.
6. In the HomeConnect app, enter
the network name (SSID) and
password (key) for your home net-
work.
7. Carry out the steps in the
HomeConnect app to connect the
appliance.
a If the display shows and lights
up permanently, the appliance is
connected to the Wi-Fi home net-
work.
8. If the appliance is not connected
to the Wi-Fi home network, the dis-
play shows Err.
‒ Check whether the appliance is
within the range of the Wi-Fi
home network.
‒ Reconnect the appliance to the
Wi-Fi home network with WPS
function.
9. Connect the appliance to the
Home Connect app →Page35.
15.3 Connecting the appli-
ance to the HomeCon-
nect app
Requirements
¡ The appliance is connected to the
WLAN home network (Wi-Fi).
¡ The HomeConnect app is open
and you have logged on.
1. Set the programme to position3.
a The display shows APP.
2. Press Start/Nachlegen.
a The appliance connects to the
HomeConnect app.
3. Once your appliance is displayed
in the HomeConnect app, carry
out the last steps in the
HomeConnect app.
a If the display shows , the appliance
is connected to the HomeConnect
app.