Siemens WM16Y890ES User Manual

65
Transportation, e.g. if moving house
Preparatory work
1. Turn off the tap.
2. Release the water pressure in the supply hose. Maintenance
– Filter in the water inlet hose ~ Page 45
3. Drain any residual detergent solution. Maintenance – Drain
pump blocked ~ Page 44
4. Isolate the washing machine from the power supply.
5. Remove the hoses.
6. Drain dispensers. ~ Page 42
Installing transportation protection devices
1. Remove covers and keep in a safe place.
If required, use a screwdriver.
2. Insert all 4 sleeves.
Clamp mains cable on the holders. Insert and tighten the
bolts.
Before switching on the appliance:
²
– Always remove the transportation protection devices!
~ Page 57
– To prevent unused detergent from flowing into the outlet
during the next wash cycle: Pour 1 litre of water into
dispenser À Á and start the Drain programme.

Siemens WM16Y890ES Specifications

General

Appliance placement	Freestanding
Loading type	Front-load
Product colour	White
Built-in display	Yes
Door hinge	Left
Drum material	Stainless steel
Control type	Electronic
Capacity	9 kg
Maximum spin speed	1600 RPM
Spin-drying class	B
Washing class	A
Delay start	Yes
Delayed start (max)	24 hours
Remaining time indication	Yes
Child lock	Yes
Energy efficiency class	A+++
Energy efficiency class detail	A+++
Width	60 cm
Depth	59 cm
Height	85 cm
Dimensions (HxWxD)	85 x 60 x 59 cm
Noise Level (Spin)	74 dB
Type	Front-loading washing machine