Siemens WU14UTA8 - Cancelling the Pro- Gramme; Resuming the Programme When the Programme Status Is Rinse Hold; Unloading the Laundry; Switching off the Appli- Ance

en Childproof lock
32
Note:If appears, it is not pos-
sible to add laundry.
When goes out, it is possible to
add laundry.
2. Open the appliance door.
3. Add or remove laundry.
4. Close the appliance door.
5. Press Start/Nachlegen.
13.12 Cancelling the pro-
gramme
1. Press Start/Nachlegen.
2. Open the appliance door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Spülen programme.
– If the water level is high, start
the Schleudern programme or
select a suitable programme for
draining.
→"Programmes", Page24
3.
Remove the laundry →Page32.
13.13 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
1. Start the Schleudern programme
or select a suitable programme for
draining.
→"Programmes", Page24
2. Press Start/Nachlegen.
13.14 Unloading the laundry
1. Open the appliance door.
2. Remove the laundry.
13.15 Switching off the appli-
ance
1. Turn the programme selector to
Aus .
2. Wipe the rubber gasket dry and re-
move any foreign objects.
3. Leave the appliance door and de-
tergent drawer open so that resid-
ual water can evaporate.
14 Childproof lock
Secure your appliance against being
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
▶ Press and hold the two ⁠3 Sek.
buttons for approx. 3seconds.
a The display shows .
a The controls are locked.
a The childproof lock remains active
even after the appliance has been
switched off and in the event of a
power failure.
14.2 Deactivating the child-
proof lock
Requirement:To deactivate the
childproof lock, the appliance must
be switched on.