Siemens WU14UTA8 - Page 36

en Cleaning and servicing
36
2. Clean the interior, the thread on
the pump cap and the pump hous-
ing.
The pump cap is comprised of two
parts which can be taken apart for
cleaning.
3. Ensure that the impeller in the
drain pump can rotate.
4. Insert the pump cap.
‒ Ensure that the parts of the
pump cap are correctly as-
sembled.
5. Screw the pump cap as far as it
will go.
90°
The handle on the pump cap must
be in a vertical position.
Before the next wash
To prevent unused detergent from
flowing straight into the outlet in the
next wash, run the Abpumpen pro-
gramme after you have emptied the
drain pump.
1. Turn on the water tap.
2. Insert the mains plug.
3. Switch on the appliance.
4. Pour 1litre of water into compart-
ment II.
5. Select a suitable programme for
draining.
→"Programmes", Page24