Siemens WU14UTG0 User Manual

Buttons en
23
Buttons
7 Buttons
Buttons
The selection of programme settings depends on the programme that is set.
You can see the selection options for each programme in the overview for
→"Programmes", Page24.
Button Selection Description
Start/Nachlegen
(Start/Pause + Re-
load)
¡ Start
¡ Cancel
¡ Pause
Start, cancel or pause the pro-
gramme.
vario Speed ¡ Activate
¡ Deactivate
Activate or deactivate a short washing
programme.
Note:Energy consumption increases.
The washing result is not affected by
this.
Fertig in (Ready
In)
1–24 hours Set the programme end.
The programme duration is already in-
cluded in the set number of hours.
Once the programme has started, the
programme duration is displayed.
Temp. °C (Tem-
perature)
– 90 °C Adjust the temperature in °C.
Schleudern (Spin) –––– - 1400 Adjust the spin speed or activate ––
–– (Rinse Hold).
If –––– is selected, the water is not
drained at the end of the washing
cycle and the spin cycle is deactiv-
ated. The laundry remains in the water
used for rinsing.
⁠3 Sek. (Child
Lock 3 sec.)
¡ Activate
¡ Deactivate
Activate or deactivate the childproof
lock.
Disable the control panel to prevent
unwanted or accidental operation.
If the childproof lock is activated and
the appliance has been switched off,
the childproof lock remains activated.
→"Childproof lock", Page41
Vorwäsche (Pre-
wash)
¡ Activate
¡ Deactivate
Activate or deactivate prewash, e.g.
for washing heavily soiled laundry.
Extra Spülen (Ex-
tra Rinse)
¡ Activate
¡ Deactivate
Activate or deactivate a washing pro-
gramme with more water and an addi-
tional rinse cycle.
Recommended for particularly sensit-
ive skin or in regions with very soft
water.

Siemens WU14UTG0 Specifications

General

Brand	Siemens
Model	WU14UTG0
Category	Washer
Language	English