Siemens WU14UTG0 User Manual

en Basic operation
40
13.12 Cancelling the pro-
gramme
Once the programme has started,
you can cancel it at any time.
Note:Please read the information in
the Safety →Page4 and Preventing
material damage →Page10 sections
to ensure that you use the appliance
safely.
1. Press Start/Nachlegen.
2. Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Spülen programme.
– If the water level is high: Start
the Schleudern or Abpumpen
programme.
3. Remove the laundry.
13.13 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
1. Set the Schleudern or Abpumpen
programme.
2. Press Start/Nachlegen.
13.14 Unloading the laundry
Note:Please read the information in
the Safety →Page4 and Preventing
material damage →Page10 sections
to ensure that you use the appliance
safely.
1. Open the door.
2. Remove the laundry.
13.15 Switching off the appli-
ance
1. Turn the programme selector to
Aus .
2. Wipe the rubber gasket dry and re-
move any foreign objects.
3. Leave the door and detergent
drawer open so that residual water
can evaporate.

Siemens WU14UTG0 Specifications

General

Brand	Siemens
Model	WU14UTG0
Category	Washer
Language	English