What to do if Sierra Wireless AirCard is not detected after TRU-Install installation?
If your modem isn't detected after TRU-Install, go to the Control Panel from the Start menu and double-click TRU-Install. When prompted to switch to modem mode, click OK and wait for Watcher to detect the modem.
Why PC Card slot no longer works after removing Sierra Wireless AirCard Modem?
To restore PC Card slot operation, restart your laptop. Before removing the modem with PC Card adapter, use the Safely Remove Hardware icon in the Windows system tray, and then select the modem.
How to start TRU-Install for Sierra Wireless Modem if it doesn't start automatically?
If TRU-Install doesn't start automatically, double-click My Computer (Windows XP) or Computer (Windows Vista, Windows 7) on your desktop. Click the TRU-Install drive, open the Win folder, and double-click Setup.exe. Follow the on-screen prompts to install the software.
General| Brand | Sierra Wireless |
|---|---|
| Model | AirCard |
| Category | Modem |
| Language | English |
Critical safety and operational warnings for the AirCard Hub.
Guidelines for safe installation, use, and maintenance of the AirCard Hub.
Situations requiring the mobile hotspot to be powered off due to safety risks.
Disclaimer of responsibility for damages arising from product use or inability to use.
Legal notices regarding product patents, copyright, and trademarks.
Advice on responsible disposal of the AirCard Hub at the end of its life.
Recommendations for safely packaging and transporting the AirCard Hub.
Contact details for Sierra Wireless sales and support.
Minimum system requirements for AirCard Hub installation.
Intended audience and operation modes of the AirCard Hub.
Key hardware components and features of the AirCard Hub.
List of all items included in the AirCard Hub package.
Highlights the main functionalities and capabilities of the AirCard Hub.
Explains the meaning of each LED light for device status monitoring.
Describes the physical ports and connectors available on the rear panel.
Lists default IP addresses, subnet masks, and login credentials.
Guides users through initial setup and placement.
Optimizing placement for signal strength and avoiding interference.
Step-by-step guide for physically installing the AirCard Hub.
How to connect devices to the AirCard Hub using Wi-Fi.
Using WPS for fast and secure wireless connections.
Connecting devices using an Ethernet cable.
Accessing USB storage devices connected to the AirCard Hub.
Basic mode for status viewing and internet access.
Mode for extended functionality and local network creation.
Mode for advanced configuration and network management.
Accessing the management console with username and password.
Configuring Wi-Fi network name (SSID) and password.
Configuring the WAN port for connection types.
Settings for automatic network configuration via DHCP.
Settings for manual IP address configuration.
Navigating to basic status and returning to home page.
Setting the LAN1/WAN port mode (LAN or WAN).
Accessing LAN and WAN configuration menus.
Configuring LAN IP, Subnet Mask, and DNS settings.
Setting the AirCard Hub's LAN IP address and related parameters.
Adjusting DHCP settings, including IP ranges and lease times.
Assigning static IPs to specific devices via DHCP reservations.
Inputting ISP-provided static IP details.
Automatic IP address acquisition via DHCP from ISP.
Configuring connection failover between WAN and WWAN.
Configuring SSID, network mode, and frequency/channel.
Setting network name and choosing authentication methods.
Using WPA-PSK, WPA2-PSK, and 802.1x for secure networks.
Using WPS for fast and secure wireless connections.
Viewing connected wireless clients.
Accessing Routing, DDNS, NTP, and System Monitor.
Adding or deleting static routes for network communication.
Configuring Routing Information Protocol for route advertising.
Configuring port forwarding and IP mapping rules.
Enabling DMZ for unrestricted internet access to LAN hosts.
Setting up Dynamic DNS to update external name servers.
Synchronizing the device's internal clock with an internet time server.
Configuring ping tests for device health and automatic reboots.
Optionally configuring automatic reboot of the AirCard Hub.
Displaying or downloading system logs for troubleshooting.
Saving and restoring the AirCard Hub's configuration.
Resetting the AirCard Hub to its original factory settings.
Instructions for updating the internal software of the AirCard Hub.
Enabling and configuring remote access to the AirCard Hub.
Specifying syslog server and enabling diagnostic functions.
Logging out of the session and rebooting the device.
Detailed hardware specifications of the AirCard Hub.
Physical dimensions and weight of the AirCard Hub.
Answers to common questions about initial setup.
Solutions for device offline issues.
Diagnosing and resolving frequent device reboots.
Changing Wi-Fi network name and password.
Instructions for sharing the internet connection with multiple users.
Steps to reset the management console password if forgotten.
FCC and Industry Canada compliance details for North America.
Conformance to EU directives and French Wi-Fi restrictions.
Australian ACMA requirements, warnings, and power supply notes.
To Next Page
