Need help?Do you have a question about the Sierra Wireless AirLink Raven XE and is the answer not in the manual?
General| Brand | Sierra Wireless |
|---|---|
| Model | AirLink Raven XE |
| Category | Gateway |
| Language | English |
Discusses data transmission guarantees, hazards, and operating precautions.
Disclaimer on manual accuracy and liability.
Legal information including patents, copyright, and trademarks.
Support contacts and document revision details.
Overview of ALEOS core technology and AceWare management suite.
Explains AceManager for deployment, monitoring, and control.
Discusses troubleshooting utility and cellular connectivity setup.
Details product features, supported technologies, and frequency bands.
Covers operating conditions, power usage, and compliance.
Describes physical ports and status lights.
Details the power connector pinout and connection.
Step-by-step guide for SIM card installation.
Instructions for setting up the Access Point Name.
Explains how to connect the device to power and other equipment.
Explains the meaning of the device's indicator lights.
Provides instructions for mounting the device using an optional kit.
Introduces AceManager as the primary configuration tool.
Explains how to create and apply configuration templates.
Details using terminal emulators for configuration via AT commands.
How to switch USB port mode (Ethernet/Serial).
Step-by-step guide for installing necessary USB drivers.
Explains using USB as virtual Ethernet and Serial ports.
Describes how to use digital inputs for event monitoring.
Details connecting external devices to the I/O port.
How to monitor input/output status using AceManager or AT commands.
Explains how power state affects device operation.
Explains AT, PassThru, and Telnet modes for communication.
Discusses forwarding data and routing principles.
Explains Public and Private modes for IP address handling.
Details the Raven XE's role as a DHCP server.
Instructions for configuring port forwarding.
Explains IP filtering and port filtering capabilities.
Explains domain names and their structure.
How to use IP Manager for addressing modems by name.
Explains DNS and steps to configure it.
How to configure the Raven XE as an SNMP agent.
Configures SNMP port, security level, and user credentials.
Configures the destination for SNMP trap messages.
Sets community string and provides MIB definition sample.
Read-only commands providing modem information.
Commands related to modem status and network state.
Commands common across modems and miscellaneous entries.
Commands for initiating connections to remote IP/Ports.
Command to terminate host data mode or connections.
Commands for remote state change and firmware upgrade.
Commands for default connection parameters and response mode.
Commands for resetting and saving modem settings.
Commands for setting date, port, and host password.
Commands for setting user ID and static IP addresses.
Commands to check SMS status and set modem speed.
Commands for configuring DNS settings.
Commands related to dynamic IP address management.
Commands for setting domain and IP Manager server details.
Commands for modem naming and PPP/Ethernet connections.
Commands to configure the DHCP server functionality.
Commands for host authentication and subnet mask configuration.
Commands for host IP and private IP address configuration.
Commands for private IP mode and host password.
Commands and notes on using PassThru mode.
Commands for PassThru echo, AT string, and refresh settings.
Commands for modem reset period and SMTP configuration.
Commands for SMS to email and SMTP server address.
Commands for SMTP sender, password, and sending emails.
Commands for SMTP user authentication and checking status.
Commands for configuring different logging levels.
Commands for PPP logging, NAI, and home agent IP addresses.
Commands for secondary home agent, secrets, and cellular tech.
Configures SNMP security levels and trap destination.
Commands for SNTP updates and Telnet timeout.
Configures Telnet port and basic firewall mode.
Defines firewall IP ranges and port filtering modes.
Instructions for configuring port forwarding.
Details parameters for port forwarding configuration.
Commands for Access Point Name and Quality of Service settings.
To Next Page
