EasyManua.ls Logo

Sierra Wireless AirPrime WP75 Series User Manual

Sierra Wireless AirPrime WP75 Series
300 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AirPrime WP8548/WP75xx/
WP76xx/WP77xx
AT Command Reference
4118047
Rev. 6

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Sierra Wireless AirPrime WP75 Series and is the answer not in the manual?

Sierra Wireless AirPrime WP75 Series Specifications

General IconGeneral
Operating Temperature-40°C to +85°C
GNSSGPS, GLONASS, BeiDou, Galileo
InterfaceUSB 2.0, UART, GPIO
Cellular StandardsLTE Cat M1/NB1, EGPRS
Data Rate (LTE Cat M1)375 kbps (DL), 300 kbps (UL)
LTE BandsB1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B26, B28
3G BandsB1, B2, B4, B5, B8
Data Rate (HSPA+)5.76 Mbps (UL)
Data Rates (EGPRS)236.8 kbps (UL)
SIM Interface3V/1.8V
Cellular TechnologyLTE, GSM
CertificationsPTCRB, GCF, FCC, IC, CE, RCM, TELEC

Summary

2: AT Password Commands

3: Modem Status, Customization, and Reset Commands

4: SIM Toolkit Commands

5: Diagnostic Commands

6: Test Commands

Introduction

Covers AT commands for regulatory approval testing of the modem's radio component.

Command summary

Lists the test commands described in this chapter.

7: Memory Management Commands

8: GNSS Commands

9: SIM Commands

11: SAR Backoff Commands

Introduction

Describes SAR-related commands used to manage the modem's SAR backoff state for regulatory compliance.

Command summary

Lists the SAR backoff and thermal control commands.

12: Audio Commands

13: I/O Commands

Introduction

Describes commands for configuring and managing GPIOs, ADCs, and other I/O functions.

16: Band Definitions

Related product manuals