SIFANG CSC-196 - Default Chapter; Table of Contents

Contents
1.General…………………………………………………………………1
1.1.Brief introduction of the device………………………………………………………………...1
1.2.Functions…………………………………………………………………………………….….1
2.Technical parameters…………………………………………………...3
2.1.Main technical parameters……………………………………………………………………...3
2.2.Environmental condition……………………………………………………………….……….6
2.3.Electrical insulation…………………………………………………………………….……….6
2.3.1.Dielectric strength .................................................................................................................... 6
2.3.2.Insulation resistance ................................................................................................................. 6
2.4.Mechanical properties…………………………………………………………………………..6
2.4.1.Vibration………………………………………………………………………………………6
2.4.2.Impact…………………………………………………………………………………………6
2.4.3.Bump………………………………………………………………………………………….7
2.5.Electromagnetic compatibility………………………………………………………………….7
2.5.1.Electrostatic discharge immunity ............................................................................................. 7
2.5.2.Radiated radio-frequency electromagnetic field immunity ...................................................... 7
2.5.3.Electrical fast transient/burst immunity ................................................................................... 7
2.5.4.Surge immunity ........................................................................................................................ 7
2.5.5.Power frequency magnetic field immunity .............................................................................. 7
2.5.6.Pulse magnetic field immunity................................................................................................. 7
2.5.7.Damped oscillatory magnetic field immunity .......................................................................... 7
2.5.8.Oscillatory waves immunity .................................................................................................... 7
2.6.Safety performance……………………………………………………………………………..8
2.7.Alarm output contact capacity………………………………………………………………….8
3.1 Cards arrangement……………………………………………………………………………...9
3.2Power supply card (Code D)…………………………………………………………………….9
3.3Main signal receiving card (Code J)…………………………………………………………...10
3.4Sub-signal receiving card (Code JF)…………………………………………………….……..12
3.5Serial port message output card (Code T)……………………………………………….……..13
3.6Idle contact type signal output card (code K)………………………………………………….14
3.7Multimode optical fiber output card (Code F)…………………………………………………15
3.8Differential signal output card (Code C)………………………………………………….……16
3.9TTL output card (Code L)……………………………………………………………………...17
3.10.Network time comparing card (Code N)……………………………………………….…….18