To Next PageTo Next Page
Need help?Do you have a question about the Sig Marine Sig100 and is the answer not in the manual?
General| Brand | Sig Marine |
|---|---|
| Model | Sig100 |
| Category | Heater |
| Language | English |
Key elements influencing draft, including air supply and chimney design.
Method to identify air source for draft testing using smoke.
Explanation of downdraft causes and how flame position affects it.
Guidance on selecting an appropriate installation spot, considering clearances.
Specified minimum distances from the heater to surrounding surfaces.
Recommended orientation of the heater for proper fuel flow.
Instructions for securing the heater and its components.
Details on chimney installation, length, and configuration for optimal draft.
Specification for the required diameter of the chimney pipe.
Information on installing and adjusting a barometric damper for draft control.
Instructions for installing a thru-deck fitting for the chimney.
Recommendation for exhaust cap types and installation placement.
How the fuel supply and overflow system function for safety.
Importance of fuel filtration and using manual shut-off valves.
Methods for supplying fuel, including main tank or day tank.
Requirements for gravity fuel feed systems, including head pressure.
Guidance on installing a low-pressure fuel pump and ensuring proper flow.
Details on installing the standard Walbro fuel pump for typical conditions.
Information on installing the heavy-duty Walbro pump for demanding installations.
Steps and considerations for upgrading a standard pump to a heavy-duty model.
Step-by-step instructions for safely lighting the heater.
How to adjust the oil metering valve for optimal fuel flow.
Procedures for measuring fuel flow rates for different models.
How different fuel types affect viscosity and heater operation.
Contents and purpose of the repair kit for the metering valve.
Detailed steps for disassembling and rebuilding the oil metering valve.
Procedure to clean carbon buildup from the burner for optimal performance.
Steps to clear blockages and clean the fuel lines.
Basic maintenance for the exterior stainless steel finish.
Overview of Sig Marine's warranty coverage and duration for products.
Policy for returning non-defective products and restocking fees.
Detailed terms, conditions, exclusions, and limitations of the warranty.
