To Next PageTo Next Page
Need help?Do you have a question about the Sig Marine Sig180 and is the answer not in the manual?
Details heater placement, chimney specs, and safety clearances.
Emphasizes the critical need for fresh air and proper ventilation.
Covers fuel filtration, pressure limits, and regulator needs.
Mandates the installation of a Carbon Monoxide alarm for safety.
Lists critical elements influencing chimney draft, such as air supply.
Guides on choosing the optimal placement for the heater.
Specifies required distances from combustible materials for safety.
Advises on the ideal orientation of the heater for performance.
Covers chimney pipe length, diameter, and elbow recommendations.
Presents options and purpose for installing a barometric damper.
Details fuel supply connection and the function of the overflow feature.
Covers fuel filtration and manual shut-off valve installation.
Discusses gravity feed and fuel pump options for fuel supply.
Compares standard and heavy-duty pumps for installation needs.
A step-by-step sequence for safely lighting the diesel heater.
Identifies common causes that lead to burner flooding.
Explains the high-temperature fuse integrated into the metering valve.
Guides on how to adjust the fuel flow rate using the metering valve.
Provides methods to measure fuel flow for proper calibration.
Discusses how different fuel types affect viscosity and heater operation.
Lists components included in the oil metering valve rebuild kit.
Provides detailed instructions for rebuilding the oil metering valve.
A yearly check for fuel system integrity and component function.
Instructions for cleaning carbon buildup to ensure proper air flow.
Addresses flames burning too lean or below the burner ring.
Explains causes of carbon buildup and remedies.
Covers sooty flames, rich burns, burner flooding, and carbon build-up.
Addresses fuel leaks, overflow issues, and air locks in fuel lines.
Discusses downdraft causes, ventilation, and preventing explosions.
Identifies valve O-ring failure as a cause for leaks.
Specifies the duration and coverage of the product warranty.
Explains the process and conditions for returning non-defective items.
Lists items and conditions not covered by the limited warranty.
Fields required for filling out and submitting the warranty card.
General| Brand | Sig Marine |
|---|---|
| Model | Sig180 |
| Category | Heater |
| Language | English |
