Sigma 700 Series - Valve Output and P.I. Settings

To Next Page

To Previous Page

- 10 -

4 digits are available for the process value display, use the   buttons to select the number of

decimal points required after the whole number, eg. – 6.000, 60.00, 600.0, etc. Press  to

advance to the following scaling items and change as required: -- sets the displayed value for

4.00ma input.

Sets the displayed value for the High Analog Input:

Press  to save and advance to the ‘Valve Output’ Menu.

Press  to scroll through the P.I. settings:--

Press  to view or adjust the current setpoint;

Press  to view or adjust gain setting.

Current Setpoint

Current Output

Note, ‘Gain’ setting increases

or decreases the speed of

response to a load change.