To Next PageTo Next Page
Need help?Do you have a question about the Sigma EM-140DG and is the answer not in the manual?
General| Brand | Sigma |
|---|---|
| Model | EM-140DG |
| Category | Camera Flash |
| Language | English |
Explains the meaning of warning and caution symbols used in the manual.
Details risks of electric shock from high voltage circuits and proper handling.
Advises on maintaining a safe distance to prevent eye injury from the flash.
Warns against operating the flash in hazardous environments like those with flammable materials.
Specifies camera compatibility (PENTAX AF) and warns against water exposure.
Provides guidance on managing temperature changes and storing the flash unit properly.
Identifies and labels all physical components of the flash and controller units.
Discusses lens compatibility, potential issues, and the use of macro flash adapters.
Covers recommended battery types, installation steps, and care.
Explains the automatic power-saving feature and how to interpret error messages on the LCD.
Provides instructions for securely mounting the flash unit onto the camera hot shoe and lens.
Describes how to activate the LCD backlight and use the auxiliary light for focusing.
Details the setup and usage of the flash in TTL automatic exposure mode.
Explains how the camera and flash communicate for exposure and how to confirm it.
Covers advanced settings like adjusting flash output ratio between tubes or firing only one tube.
Explains how flash modes interact with camera exposure modes like Shutter Priority, Aperture Priority, and Manual.
Outlines the maximum number of continuous flashes allowed before a cool-down period is needed.
Details the process of manually setting the power output for each flash tube.
Describes how to use the flash with shutter speeds faster than the camera's normal sync speed.
Explains how second curtain sync creates a natural motion trail effect.
Guides on using the modeling light to preview lighting and shadow effects before shooting.
Details how to adjust flash exposure compensation in P-TTL mode for fine-tuning exposure.
Explains how to set up the flash for multiple sequential flashes within a single frame.
Provides step-by-step instructions for configuring the flash unit as a wireless controller.
Details how to set up an off-camera flash unit to work wirelessly with a controller.
Covers setting maximum flash output and lists key technical specifications of the product.
