Sigma ROX 12.0 User Manual

5
2

Assembly
3

Before initial use
NOTE
Fully charge the ROX 12.0.
Charge the device using the micro USB cable and the USB port on your PC.
Alternatively, use the USB charger. The process takes approximately 3 hours.
To charge the device, plug the USB cable into the micro USB port on the
back of the ROX 12.0 and the USB port on your PC or the USB charger
(not included in the delivery).
3.1 Initial use
1. Press and hold the POWER ON button (right upper button)
2. Follow the instruction on the screen
The initial wake up will help to set up the most important settings.
If you want to change a setting, you can do this any time when going
to the SETTING menu.
EN

Sigma ROX 12.0 Specifications

General

Brand	Sigma
Model	ROX 12.0
Category	Bicycle Accessories
Language	English