Need help?Do you have a question about the Sigma Rox 6.0 and is the answer not in the manual?
General| Water Resistance | IPX7 |
|---|---|
| GPS | Yes |
| Speed Measurement | Yes |
| Distance Measurement | Yes |
| Display Type | LCD |
| Heart Rate Measurement | Yes (with optional sensor) |
| Connectivity | ANT+ |
| Sensors | GPS |
Introduction to the ROX 6.0 bike computer and its overall capabilities.
Lists all the items included in the ROX 6.0 bike computer package.
Details the primary functions and capabilities of the ROX 6.0 bike computer.
Instructions for securely attaching the ROX 6.0 bracket to bicycle handlebars or stem.
Guides on attaching speed/cadence transmitters and magnets for accurate data.
Procedure for correctly attaching and wearing the heart rate chest belt.
Steps to configure the ROX 6.0 for a second bicycle using the STS speed transmitter.
Instructions on how to attach the main ROX 6.0 unit to its mounted bracket.
Procedure to awaken the ROX 6.0 from deep sleep mode for first-time use.
Steps for pairing and synchronizing speed, cadence, and heart rate sensors.
Explains the purpose and action of each button on the ROX 6.0 device.
Details the information displayed in the top, middle, and bottom segments of the ROX 6.0 screen.
Setting the device's display language and measurement units (km/h or mph).
Instructions for setting the air pressure at sea level for altitude calibration.
How to input the current actual altitude into the ROX 6.0.
Procedure for setting the default home altitude for reference.
Setting the correct wheel size for bike 1 or bike 2 for accurate distance and speed.
Configuring the current time and date on the ROX 6.0.
Inputting personal age and weight for personalized training data calculations.
Configuring the user's gender for personalized training data.
Setting the maximum heart rate for accurate training zone calculations.
Customizing target training zones based on heart rate for fitness monitoring.
Defining four intensity zones with specific heart rate ranges for training control.
Entering existing total distance values for bike 1 or bike 2.
Entering existing total trip time values for bike 1 or bike 2.
Setting the total accumulated hiking time for the device.
Entering total accumulated altitude ascent/descent for bike or hiking.
Setting the total accumulated hiking altitude.
Entering total accumulated calories burned for bike or hiking.
Enabling or disabling the audible zone alarm during training.
Adjusting the contrast level of the ROX 6.0 display.
Procedure for saving settings and exiting the basic configuration menu.
Instructions for turning the ROX 6.0's display backlight on and off.
Understanding how the device indicates current speed relative to average speed.
Using the lap counter function to record intervals during rides.
Accessing and viewing detailed data for each recorded lap.
Method for calibrating the initial altitude reference point.
Using the built-in stopwatch and countdown timer functions.
Viewing and tracking the total vertical ascent and descent for a trip.
Procedure for resetting all recorded trip data to zero.
Viewing accumulated total distance, time, altitude, and calories.
Understanding the service interval reminder for bike maintenance.
Activating and exiting the transport mode to conserve battery during transit.
Connecting the ROX 6.0 to a computer for data download and analysis.
Information on retrofitting a wired speed transmitter for alternative speed measurement.
Synchronizing the heart rate chest belt for use in hiking mode.
How to start and stop the hiking time measurement.
Configuring a target time for hiking activities to monitor progress.
Clearing all recorded hiking-specific trip data from the device.
Explains the three methods for calibrating the ROX 6.0's altitude measurement.
Key details on water resistance, transmitter care, and training advice.
Solutions for common issues like display errors, synchronization problems, and sensor failures.
Answers to common user queries regarding device functionality and maintenance.
Reference table for the operational range and default settings of device parameters.
Step-by-step guide for replacing batteries in the bike computer and transmitters.
Information on operating temperature limits and specific battery types required.
Details on how to submit a warranty claim and contact information for support.
Statements regarding compliance with FCC Rules and Industry Canada standards.
To Next Page
