5
4.0) OPERATIVE CONDITIONS: Local conditions: the machine requires to be
installed in a lighted, airy building, on a compact and
flatten support. Temperature ranging from 5 to 40°C;
humidity not over 50% at 20°, or not over 90% at 40°C.
Lighting: lights available for the operator must comply
with the type of work being carried out, according to the
general lighting, in compliance with the regulations in force.
Vibrations: when operations are properly executed, vibrations cannot provoke dangerous
situations.
Acoustic emissions: <75 dbA – normal use.
Electromagnetic environment: this machine has been conceived to operate in an
electromagnetic industrial environment.
5.0) DIMENSIONS AND WEIGHTS
Model kW Belt dim. Opening dim. in
mm
Closure dim. in
mm
weight
kg
Packaging
SFG500B 0,55 500x700 2035x612x955 750x825x955 142 1340x820x1200
SFG500T 0,55 500x700 2035x1270x955 750x1482x955 170 1340x820x1500
SFG500TM 0,55 500x1180 2990x1270x955 1100x1920x955 185 1340x820x1500
SFG600B 0,75 600x700 2035x612x1055 750x825x1055 200 1340x820x1200
SFG600BM 0,75 600x1180 2990x612x1055 1100x1260x1055 210 1340x820x1500
SFG600TM 0,75 600x1180 2990x1270x1055 1100x1920x1055 232 1340x820x1500
SFG600TMM 0,75 600x1600 3840x1270x1055 1440x2330x1055 260 1340x820x2000
SFG600TL 0,75 600x1180x1600 3415x1270x1055 300 1340x820x2000
6.0) TRANSPORT PACKAGING - MOVEMENTS
6.1) PACKAGING DIMENSIONS: the box on pallet measures A=1340 - B=820 - H= refers
to the table
6.2) LIFTING REGULATIONS BY MEANS OF LIFT CARRIAGE:
• Make sure the means of lifting is suitable for the charge.
• Enlarge the lifting forks at the maximum.
• Make sure that the lifting forks are out of the pallet when operating.
• During operations, keep the load as nearer as the floor as possible.
To Next Page
Loading...