Signal Hound SM200A Configuration Guide

Linux Setup
23
Find the 10GbE network interface in the list, and create a new profile using the ‘+’ button located
to the right of the interface name. Please note the interface name (enp3s0f0 in the picture above)
as it will be used in the commands documented here.
In the new profile, under the IPv4 tab, set a manual IPv4 address of 192.168.2.2 and netmask of
255.255.255.0.

Signal Hound SM200A Specifications

General

Brand	Signal Hound
Model	SM200A
Category	Measuring Instruments
Language	English