Need help?Do you have a question about the Signal Hound SM200A and is the answer not in the manual?
General| Frequency Range | 100 kHz to 20 GHz |
|---|---|
| Resolution Bandwidth | 1 Hz to 10 MHz |
| Interface | USB 3.0 |
| Typical DANL at 10 GHz | -150 dBm/Hz |
| Typical DANL at 20 GHz | -145 dBm/Hz |
| LO Phase Noise at 20 GHz (10 kHz offset) | -95 dBc/Hz |
| Amplitude Accuracy | ±0.5 dB |
| Input IP3 | +15 dBm |
| Trigger Types | External |
| Power Consumption | 10 W |
To Next Page
