What to do if my Signature Indoor Fireplace has no power?
First, verify that the Signature Indoor Fireplace is properly plugged into a standard 120V outlet. If it is, try pressing the power button located on the control panel.
Why is my Signature Indoor Fireplace showing flames but not blowing warm air?
Ensure that the temperature setting you've selected is higher than the current room temperature. Also, try turning the fireplace button off and on several times to ensure it is in the 'ON' position.
What to do if my Signature Indoor Fireplace doesn't work even when all switches are 'ON' and the thermostat is at '99'?
Turn all switches to the 'OFF' position, then unplug the Signature Indoor Fireplace from the wall outlet and wait 5-10 minutes. After this time, plug the unit back in and try operating it as usual.
What to do if my Signature Indoor Fireplace display shows a blank space and is flashing in alarm mode?
Unplug the Signature Indoor Fireplace from the wall outlet and wait for 5-10 minutes. Then, plug it back in and try operating it normally.
General| Brand | Signature |
|---|---|
| Model | EF19-23 |
| Category | Indoor Fireplace |
| Language | English |
Details on how to properly ground the fireplace for safe operation and electrical safety.
Guidance on choosing the optimal location for the fireplace, considering ventilation.
Technical details and dimensions of the fireplace unit including weight and power.
Instructions for operating the fireplace using the remote control, including its functions.
Instructions for operating the fireplace using the main control panel buttons.
Explanation of the timer function and its display indicators for auto shut-off.
Details on adjusting flame brightness and its indicators (L1-L5).
Information on thermostat settings and temperature display (Fahrenheit/Celsius).
Information about the LED bulbs used in the fireplace, noting they are maintenance-free.
Instructions and precautions for cleaning the fireplace unit safely.
Defines the 'Fireplace Unit' for warranty purposes, including all electrical and physical components.
Details limitations, exceptions, remedies, and labor coverage for warranty claims.
Lists exclusions from warranty coverage for various non-residential or altered product uses.
Excludes damages caused by chemical treatments or protective coatings applied to the finish.
States that unauthorized product modifications by any person void the warranty.
Discusses limitations on implied warranties such as merchantability and fitness for purpose.
States no other express warranties are made and limits liability for indirect damages.
General safety caution regarding hot surfaces and child supervision during use.
Outlines the steps for the original purchaser to follow for obtaining warranty service.
To Next Page
