Troubleshooting
Do not repair or disassemble the air conditioning by
yourself. Unqualified repair will lead to failure of the
warranty card, and may cause damage to users or
their properties.
Problems Reasons Solutions
Theair
conditio
ning
doesnot
work.
There is no
electricity.
Turn it on after
connecting it to
a socket with electricity.
The overflow
indicator displays
"FL".
Discharge the water
inside.
The ambient
temperature is too
low or too high
Recommend to use the
machine in at the
temperature of 7-35 ℃
(44-95 ℉).
In dehumidification
mode, the ambient
temperature is low.
The machine is placed
in a room with an
ambient temperature of
greater than 17 ℃ (62 ℉).
There is direct
sunlight.
Pull the Curtain.
42
In cooling mode, the
room temperature is
lower than the set
temperature; in
heating mode, the
room temperature is
higher than the set
temperature.
Change the set
temperature.
To Next Page
Loading...
Need help?
General