Protection function
Frost Protection Function:
In cooling, if the temperature of the exhaust pipe is too low, the
machine will automatically enter protection status; if the
temperature of the exhaust pipe rises to a certain temperature,
it can automatically revert to normal operation.
Overflow Protection Function:
When water in the water pan exceeds the warning level, the
machine will automatically sound an alarm, and the "FULL"
indicator light will flash. At this point, you need to move the
drainage pipe connecting the machine or the water outlet to
sewer or other drainage area to empty the water (details see
Drainage Instructions at the end of this chapter). After the
water is emptied, the machine will automatically return to the
original state.
Protection Function of the Compressor:
To increase the service life of the compressor, it has a 3-
minute delay booting protection function after the
compressor is turned off.
Installation and adjustment
Installation
：
Warning: before using the mobile air conditioning,
keep it upright for at least two hours.
The air conditioning can be easily moved in the room.
In the moving process, ensure that the air
conditioning is in the upright position and the air
conditioning should be placed on a flat surface. Do
not install and use the air conditioning in the
bathroom or other humid environments.
35
To Next Page
Loading...
Need help?
General