CLEANING AND CARE
Before cleaning the appliance, ensure it
is disconnected from the power supply
and has cooled down completely.
Do not use abrasives or harsh cleaning
solutions.
Do not immerse the appliance in any
liquid. To clean the exterior, a slightly
damp, lint-free cloth may be used.
Cleaning the filter:
To remove the air filter, unscrew it
from the back of the of the Air Cooler
& Heater using a Philips screw driver.
Remove the air filter from the appliance
and clean it first with a brush and neutral
detergent, and then with clean water.
Allow it to air dry before placing back in
the appliance.
Cleaning the cooling pad:
After removing the air filter, remove the
cooling pad. Clean the cooling pad with
a brush and neutral detergent, and then
rinse with clean water. Allow it to air dry
before placing back in the appliance.
Cleaning the water tank:
Pull out the water tank from the back of
the Air Cooler & Heater and clean it in
warm, soapy water. Allow to dry and
reinstall.
To Next Page
Loading...
Need help?
General