signaturebrand.co 7
Dispose of the packaging in a responsible
manner.
Select between 0.5 to 7.5 hours.
Press the button repeatedly to
increase in 1/2 hour segments.
Example timer setting 5 1/2 hours
Once the set time period has been
reached the appliance will turn off.
Make sure that the warm/cool dial
is set at cool. Press this button
after you have added water and
ice boxes to the water tank. The
air cooler will increase the
humidity before the temperature
decreases.
Putting the frozen ice boxes in the
water tank will enhance the cooling
effect. When the water in the water
tank is low, an alarm will sound for
a few seconds, and the icon will
flash reminding you to top up the
water in the tank.
First Press - Cool Function icon
and two fan icons will be
illuminated.
Second Press - Humidity
Function the will turn off
Press this button, the
icon will illuminate.
The appliance will
automatically move left and
right, to distribute more air
around the room.
Press this button, the icon will
illuminate. The appliance will
releases Anions to purify the
surrounding atmosphere. This
function works when the warm/cool
dial is set to either!
Set the Warm/Cool dial to Cool.
Press the mode button
on the remote control once for the
natural wind function. The natural
wind indicator on the
control panel will illuminate and the
wind speed will vary automatically.
Press the mode button a second
time for the sleeping wind function.
The sleeping wind
indicator on the control panel will
illuminate and the wind speed will
vary automatically.
On/Off
Switch
(side of
appliance)
Switches power on or off. This
must be on to use any of the
below applications
Press this button to switch the
appliance on or off. If in
warm setting the icon will
illuminate. If cool setting
the icon will illuminate.
The speed button cannot be used
with the warm function.
There are three speed settings:
Low, Medium and High. Press the
button repeatedly to move through
the settings.
Low speed -
Medium speed -
To Next Page
Loading...
Need help?
General