EasyManuals Logo

Signature SDW6001A+ User Manual

Signature SDW6001A+
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
1.After Every Wash
2.Remove the Plug
3.No Solvents or Abrasive Cleaning
4.When not in use for a long time
5.Moving the Appliance
6.Seals
After every wash, turn off the water supply to the appliance and leave the door slightly open so that moisture
and odors are not trapped inside.
Before cleaning or performing maintenance, always remove the plug from the socket.
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products.
Only use a cloth with warm soapy water.To remove spots or stains from the surface of the interior, use a cloth
dampened with water with a little vinegar, or a cleaning product made specifically for dishwashers.
It is recommend that you run a wash cycle with the dishwasher empty and then remove the plug from the
socket, turn off the water supply and leave the door of the appliance slightly open. This will help the door
seals to last longer and prevent odours from forming within the appliance.
If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can be
positioned on its back.
One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this from occurring.
The spray arms can be easily removed for periodic cleaning of the nozzles to prevent possible clogging.
Wash them under running water and carefully replace them in their seats, checking that their rotary
movement is in no way impeded.
Grasp the middle of the spray arm, pull it upwards to remove it. Wash the arms under a jet of running water
and replace it carefully to its seat. After reassembly, check that the spray arms rotate freely. Otherwise,
check that they have been installed correctly.
Cleaning the Spray Arms
How to keep your dishwasher in shape
8. Installation instruction
-49-
Attention:
Warning
The installation of the pipes and
electrical equipments should be
done by qualified professionals.
Electrical Shock Hazard
Disconnect electrical power
before installing dishwasher.
Failure to do so can result in
death or electrical shock.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Signature SDW6001A+ and is the answer not in the manual?

Signature SDW6001A+ Specifications

General IconGeneral
BrandSignature
ModelSDW6001A+
CategoryDishwasher
LanguageEnglish

Related product manuals