EasyManua.ls Logo

Signature SKSFD4826P - Ice Bin Drawer Assembly; Removing and Assembling Ice Bin Drawer

Signature SKSFD4826P
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20 OPERATION
5 Grip both sides of the drawer and pull it up to
remove it from the rails.
6 To assemble, pull out both rails
simultaneously, until they are fully extended.
7 Grasp the drawer on each side and hook the
drawer supports into the rail tabs located on
both sides.
CAUTION
Do not hold the handle when removing or
replacing the drawer. The handle may come off,
causing personal injury.
8 Lower the door into its final position and
insert the screws in the rails on both sides.
9 Insert the basket into the frame.
10 Push the button to engage the stopper on
either side.
Removing/Assembling the Ice Bin
Drawer
For added room in the freezer drawer, remove the
ice bin drawer.
1 Pull the upper left freezer drawer open to full
extension.
2 Pull the ice bin drawer out to full extension.
en-us_main.book.book Page 20 Tuesday, January 10, 2023 2:32 PM

Other manuals for Signature SKSFD4826P

Related product manuals