21OPERATION
ENGLISH
3 Gently lift and pull out the ice bins.
4 Press the release levers a on either side of
the rail and pull out the ice bin drawer.
5 To assemble, pull out both rails
simultaneously, until they are fully extended.
6 Grasp the ice bin drawer on each side and
hook the drawer supports into the rail tabs
located on both sides.
7 Lower the ice bin drawer into its final position.
8 Replace the ice bins in the drawer.
• Use care if you remove the ice bins while the
lower drawer is open. Ice can overflow the bins
and drop behind the lower freezer drawer,
preventing the drawer from fully closing.
To remove ice from behind the lower drawer,
disassemble the ice bins and drawer.
Shelves
Detaching/Assembling the Shelf
The shelves in the refrigerator are adjustable to
meet individual storage needs.
Adjusting the shelves to fit items of different
heights will make finding the exact item you want
easier.
• Make sure that shelves are level from one side to
the other. Failure to do so may result in the shelf
falling or spilled food.
• Do not clean glass shelves with warm water
while they are cold. Shelves may break if
exposed to sudden temperature changes or
impact.
• Glass shelves are heavy. Use special care when
removing them.
1 To detach, tilt up the front of the shelf and lift
the shelf straight up.
2 Pull the shelf out.
en-us_main.book.book Page 21 Tuesday, January 10, 2023 2:32 PM
To Next Page
Loading...
Need help?
General
