Fan noise
coming from the
induction hob.
A cooling fan built
into your induction
hob has come on to
prevent the
electronics from
overheating. It may
continue to run even
after you’ve turned
the induction hob off.
This is normal and needs no
action.
Do not switch the power to
the induction hob off at the
wall while the fan is running.
Pans do not
become hot
and appear in
the display.
The induction hob
cannot detect the
pan because it is not
suitable for induction
cooking.
The induction hob
cannot detect the
pan because it is too
small for the cooking
zone or not properly
centered on it.
Use cookware suitable for
induction cooking. See
section ‘Choosing the right
cookware’.
Centre the pan and make
sure that its base matches the
size of the cooking zone.
The induction
hob or a
cooking zone
has turned itself
off
unexpectedly, a
tone sounds or
an error code is
displayed.
Technical fault. Please note down the letters
and numbers, switch the
power to the induction
hob off at the wall, and
contact a qualified
technician.
EN-31
To Next Page
Loading...
