signia miniPocket - Page 21

21
X
Release the button.
The remote control is now in setup mode, the LED will be
on and the signal 󰘵rength can now be changed.
XTo switch to the lowe󰄋 signal 󰘵rength, press until the
LED 󰘱ashes slowly.
To switch to the 󰄋ronge󰄋 signal 󰘵rength, press
until
the LED 󰘱ashes quickly.
XTo exit the setup mode of the remote control, wait
30 seconds or move the key lock switch to lock position
(red color visible).
XTo continue using your remote control, ensure that it is
unlocked (green color visible).